This is an old revision of the document!

====== Device management ====== ：This is used to manage all devices in the system, devices including: * (DAHDI) * SIP，IAX2,MGCP via internet * or any telephone (outside line) which can also be one device of the system. **Module function：** Add and set the device parameters, and make sure the devices are connected to the system. ===== Add device ===== On the left menu, Click [[:en:module_manual:pbx|PBX]] -> Device management, click **[Add]** to open the device add page. {{:en:module_manual:pbx:device_add.jpg?768|Add Device}} ==== Rquired fields ==== * **Device name：**the name of the device, you can enter anyname; * **Ext. No.：** the internal number of the extension, used for internal calls. Inside a team, same number cannot be repeated. * **username：** the system automatically this username automatically, the fomat is team identification- ext. no., e.g., astercc-5000 (when configuring the softphone, in account and authentication username shall enter this（在配置软电话时，用户名和鉴权用户名将填写此项）) * **Secret：** enter a password for the device. (when configuring the softphone, enter this in the password.) * **Team：** select a team the device delongs to * **Account：**choose the account the the device is under, the number in the bracket is the number of the already existing devices. * **Device type：** four types:(SIP, IAX2, MGCP,DADHI and outside line devices) <note tip>Outside line devices can only answer calls inside the system, but cannot place calls</note> * **Status：** whether to enable this device * **Template：**The parameter template the device uses. Using template can help us batch adjust the parameter of devices quickly; * **Allow dial：** whether allow the device to dial the number outside the system. <note tip>When you choose external in the device type, the system will show the field requiring external number to be entered</note> {{:en:module_manual:pbx:device_external.jpg?768|External Device}} ==== Optional fields ==== * **CID number：** set the CID number (internal calls) * **CID name：** set the CID name（internal calls，only IP phones support CID name） * **Time out：** calling a device and it is not answered within this time, then the call is failed. ==== Advnced ==== {{:en:module_manual:pbx:device_advanced.jpg?768|Device Advanced}} * **OCID NUM：** set the OCID number (outside calls); * **OCID Name：** set the OCID name (outside lines, only support IP lines); * **DND：** whether to enable the DND function of this device; * **Recording：** whther to enable the recording function of this device; * **Voice mail：**whether to enable the voice mail function; * **语音邮箱密码：**填写语音邮箱密码。 * **邮 箱：**填写语音邮箱地址。 * **Host:** When you set this, only the devices of this address can register (limited to internet devices); * **Is Trunk: ** Whether to assign an outbound trunk to this device; * **Call pick:** the range of call picks * **Group ** Agents can only pick calls from the same group; * **Team ** Agents can pick the calls from the same team. * **Ringback music：** the music the customer hear when he calls in and waits to be picked up. * **Device detail：** for some customised configuration. * **Agent Mode：** * **MAC Address：** ===== Edit the device ===== In the device list, double click a device to open the edit window: {{:en:module_manual:pbx:device_edit.jpg?768|Edit Device}} {{:en:module_manual:pbx:device_blacklist.jpg?768|Add Blacklist}} * Black list: set a list of numbers which are not able to get through to this device. {{:en:module_manual:pbx:device_whitelist.jpg?768|Add Whitelist}} * White list: set a list of numbers and only the numbers on the list can call in. * click [[:en:module_manual:advanced|Advanced]] -> [[:en:module_manual:advanced:blacklist|Blacklist]] and [[:en:module_manual:advanced|Advanced]] -> [[:en:module_manual:advanced:whitelist|Whitelist]],also can open the blacklist/whitelist page ===== Tips ===== After saving the device information, a yellow banner shows up and asks for apply. Click it and make the set take effect. {{:en:module_manual:pbx:device_reload.jpg?768|Reload}}