• System's WEB【Advanced】–>【templates】–>“Add”

• Introduction to the configuration panel fields

Name：Can be arranged to fill their own (this column is set to yealink)

Type：IP Phone Auto provisioning (for yealink phone fixed option)

Type：SIP（Fixed option）

Team：All（Applicable system All or team applies to team）

Detail：Fill in the details field “Fill in the template as follows” (Please note that the “Fill in the template as follows”)

Memo：According to their needs fill in the instructions

• Fill in the template as follows

#!version:1.0.0.1
######################################################
##
Account1 Basic Settings
##
######################################################
account.1.enable = 1
account.1.label = %% username %%                       #Comment1
account.1.display_name = %% lastname %%                #Comment2
account.1.auth_name = %% deviceidentity %%             #Comment3
account.1.user_name = %% deviceidentity %%             #Comment4
account.1.password = %% secret %%                      #Comment5
account.1.outbound_proxy_enable = 0
account.1.outbound_host =
account.1.outbound_port =
account.1.sip_listen_port =
account.1.transport =
#######################################################
##
Failback
##
######################################################
account.1.reregister_enable = 1
account.1.naptr_build =
account.1.fallback.redundancy_type =
account.1.fallback.timeout =
account.1.sip_server.1.address = xxx.xxx.xxx.xxx       #Note：xxx.xxx.xxx.xxx Replace the SIP IP of the server (note please delete)
account.1.sip_server.1.port = xxxx                     #Note：xxxx Replace the SIP port number of the server (Note Delete)
account.1.sip_server.1.expires = 1800
account.1.sip_server.1.retry_counts = 3
account.1.sip_server.1.failback_mode =
account.1.sip_server.1.failback_timeout =
account.1.sip_server.1.register_on_enable = 1
account.1.sip_server.2.address =
account.1.sip_server.2.port =
account.1.sip_server.2.expires =
account.1.sip_server.2.retry_counts =
account.1.sip_server.2.failback_mode =
account.1.sip_server.2.failback_timeout =
account.1.sip_server.2.register_on_enable =
######################################################

• The five lines of the comment in the template above

Template Comment Row Value Field Description:

%% username %%：Value in the Accounts corresponding to the account in the "Username" value.

%% lastname %%：Value in the Accounts corresponding to the account in the "Last Name" value.

%% firstname %%：Value in the Accounts corresponding to the account in the "First Name" value.

%% deviceidentity %%：Value in the Devices corresponding to the account in the "Username" value.

%% secret %%：Value in the Devices corresponding to the account in the "Secret" value.

Template Comment Line Description:

#Comment1：Used to set the yealink phone account in the [Label], the value may be in the username, can also be taken in the lastname, firstname.

#Comment2：Used to set the [Display Name] in the account of yealink phone. It can be one or two of lastname, firstname. (The value of the two fields can be written as %% lastname %%%% firstname %%)

#Comment3：Used to set the [Register Name] in yealink phone account, fixed value is in %% deviceidentity %%.

#Comment4：Used to set [User Name] in yealink phone account, fixed value is in %% deviceidentity %%.

#Comment5：Used to set the [Password] in the account of yealink, fixed value is in %% secret %%.

• After successfully saving the PBX template, the following is provisioned.

• System's WEB【PBX】–>【Devices】–>Edit a specific device–>【Advanced】–>“MAC Address”, Fill in the MAC address of the yealink phone

• System's WEB page 【System】 → 【Settings】 → 【ADVANCED SETTINGS SYSTEM】 → “Default Team” → Double-click the option to select an empty device from a team, And devices from the team is not bound from this phone's MAC address.

• Login yealink phone configuration page → [Settings] → [Automatic Updates] → “Server Address”

Fill in the fixed：http://xxx.xxx.xxx.xxx/provisions/provisioning（xxx.xxx.xxx.xxx, Replace the server with the IP）

• Click Update Now to obtain the configuration result