Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
en:module_manual:pbx:trunk [2013/08/03 03:53] shangy |
en:module_manual:pbx:trunk [2017/12/12 03:05] (current) |
||
|---|---|---|---|
| Line 29: | Line 29: | ||
| * **CID name：** CID name displays (now only supports some trunks). | * **CID name：** CID name displays (now only supports some trunks). | ||
| * **Details：**enter the configuration parameter of the trunk | * **Details：**enter the configuration parameter of the trunk | ||
| + | * **Max Unavailable:** When the call failed constantly via the trunk, it will be disabled, it often applies to predictive dialer, using a trunk group, this could avoid whole campaign fail due to one trunk problem. 0 means this feature is disabled. | ||
| * **Max calls** the max. concurrent calls allowed in the trunk | * **Max calls** the max. concurrent calls allowed in the trunk | ||
| - | |||
| ==== Advanced ==== | ==== Advanced ==== | ||
| {{:en:module_manual:pbx:trunk_add_advanced.jpg?768|Trunk Add For Advanced}} | {{:en:module_manual:pbx:trunk_add_advanced.jpg?768|Trunk Add For Advanced}} | ||
| - | * **Enforce use rate：** When a team places outbound calls, it would match the device rate by the trunk. If you use the enforce rate, you must make it to each device to achieve outbound calls, otherwise the outbound calls would not be placed. If you do not limit the rate, you dont need to match the device rate.团队外呼时，根据中继去匹配分机费率，如果强制计费，必须匹配到分机费率才能外呼，否则不会外呼。如果不强制，那么就不需要匹配分机费率。(请修改加工一下这句谢谢) | + | * **Enforce use rate：** When system try make a call via this trunk, it would try match a device rate of the trunk. If you use the enforce rate, you can't dial out if it failed to match a rate, if this option is not set to yes, system can dial out event no device rate match. |
| * **Always use trunk CID：**If you choose "yes" here, then no matter what number has been set outside this page, the number set in this trunk will be used. | * **Always use trunk CID：**If you choose "yes" here, then no matter what number has been set outside this page, the number set in this trunk will be used. | ||
| * **Cluster trunk** If you use this system and other systems together, choose **"yes"** | * **Cluster trunk** If you use this system and other systems together, choose **"yes"** | ||
| Line 51: | Line 51: | ||
| - | 点击 [编辑中继规则]，打开中继规则设置界面。 | + | |
| + | Click [Edit rule] to open the trunk rule editer | ||
| {{:en:module_manual:pbx:trunk_add_rule.jpg?768|Add Trunk Rule}} | {{:en:module_manual:pbx:trunk_add_rule.jpg?768|Add Trunk Rule}} | ||
| - | 号码进入中继后，将按你设置的规则进行匹配，如果匹配到，就按你规定的规则去移除前缀，增加前缀。 | + | When a number enters the trunk, and it will match by the rule you set, and if it matches, the prefix will be deleted or added by you rules. |
| + | |||
| + | **Rule Status: ** Including Enable, Disable, Refuse | ||
| - | **属 性：** 包括 允许呼叫、禁用本规则、禁止呼叫。 | + | **Object：** Including Dst Number, Callerid Number, Calleriid Name |
| - | **号码前缀：**匹配什么样的号码前缀。你写了0411 那么号码开头是0411的号码就会找到这条规则，并按规则去执行操作。 | + | **Ori prefix：** What kind of number with this prefix will match. IF you enter 0411, then the number start with 0411 will be matching this rule and execute by the rules. |
| - | **号码长度：**要匹配的号码长度是多少。 | + | **Ori length：** the length of the number that matches. |
| - | **移除前缀：**匹配到号码后，要将你填写的前缀删除。 | + | **Remove prefix：**When the number matches, the prefix you entered will be removed. |
| - | **增加前缀：**匹配到号码后，要将你填写的内容放到号码前边。 | + | **Add prefix：**When the number matches, the prefix you entered will be added. |
| - | 规则设置完成后，点击【确定】按钮进行保存。保持后的数据将显示在下方的表格中。 | + | Click [save] after finishing the rule set, and the new information will be displayed on the table on the bottom. |
| {{tag>:zh:模块使用说明:PBX管理 :zh:模块使用说明:PBX管理:中继 :zh:模块使用说明:PBX管理:中继:中继规则}} | {{tag>:zh:模块使用说明:PBX管理 :zh:模块使用说明:PBX管理:中继 :zh:模块使用说明:PBX管理:中继:中继规则}} | ||
| {{topic>:zh:中继}} | {{topic>:zh:中继}} | ||
